Parts by Type

print This page

End Yokes

Filters: STYLE = SR, SERIES = 1310,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
2-4-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD Spicer
3104-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD PTI
2-4-3331 1310 13 0.878 2.000 1.567 2.562 SR LD Spicer
2-4-5411 1310 14 1.268 2.000 2.500 3.688 SR .375 Dia.set screw @ 6 OR 12, hub diameter not ground LD Spicer
2-4-1741 1310 14 1.268 2.120 1.500 2.562 SR LD Spicer
2-4-4931 1310 15 1.010 1.594 2.656 3.562 SR LD Spicer
2-4-4921 1310 15 1.010 2.000 1.062 2.312 SR LD Spicer
2-4-8241 1310 15 1.010 2.120 1.470 2.500 SR LD Spicer
2-4-6301 1310 18 1.215 2.120 1.500 2.562 SR LD Spicer
2-4-6341 1310 19 1.274 2.000 1.344 2.500 SR LD Spicer
2-4-5781 1310 21 1.375 2.125 1.469 2.562 SR LD Spicer
3104-266 1310 26 1.146 1.500 1.469 2.875 SR 0 Snap ring style midship end yoke used on Nissan, Ford, Toyota shafts & more. (3153-252, 3153-302) LD PTI
3104-266M 1310 26 1.146 1.450 1.469 2.875 SR 0 Same as 3104-266 but seal surface turned to 1.45" LD PTI
3104-267 1310 26 1.146 1.450 1.469 2.875 SR 0 Forged, PTI 26 spline midship stubs LD PTI
3104-302 1310 30 1.276 1.732 1.870 3.375 SR N/A infiniti center yoke LD PTI
2-4-8061 1310 36 0.878 1.375 1.000 2.562 SR LD Spicer